screed - транскрипция, произношение и перевод онлайн

Транскрипция и произношение слова "screed" в британском и американском вариантах. Подробный перевод и примеры.

screed / маяк, длинная скучная речь, нудная речь
[skriːd]
[skriːd]
Перевод
имя существительное
маяк
lighthouse, beacon, pharos, screed, seamark
длинная скучная речь
screed
нудная речь
screed
Определения
имя существительное
a long speech or piece of writing, typically one regarded as tedious.
There are other misimpressions created by your articles that necessitate a response, but I did not intend for this to become a screed against your writing.
a leveled layer of material (e.g., cement) applied to a floor or other surface.
The lift was inoperable, the walls had been left with barely an undercoat on them and there was bare screed on the floors.
глагол
level (a floor or layer of concrete) with a straight edge using a back and forth motion while moving across the surface.
Once the floor is initially screeded , the first hand tool in the superflat process is the saw beam.
Примеры
I could have predicted that it would be another anti-government screed .
This is to counterbalance the screed below, you see.
The lift was inoperable, the walls had been left with barely an undercoat on them and there was bare screed on the floors.
The main way to spread out concrete is directly from the truck chute, keeping a uniform level in front of the straightedge or vibrating screed .
During the installation we ran the screed off the slope laser and were able to pick up the cross-slope laser and use it for our pitch on the tennis courts.
It is not the moisture in the slab or screed which is important, but the quantity of moisture leaving the slab and generating the vapour pressure.
And it's clear that her web site still features the screed quite prominently posted.
If you are building large slabs, could you survive without a laser screed or a power trowel?
Every single column written by him is a screed against the president; apparently, there isn't anything else worth writing about.
The surface will start drying out in an hour or so, and that's when you should screed the surface again, giving it the final finish.