We believe this activation is probably an ohmic phenomenon like an instantaneous I-V relation.
Resistance of electrodes was held below 10K ohms .
Both antennas feature linear polarization, an impedance of 50 ohms and maximum input power at 10 watts.
At low potentials, pores remain open and demonstrate ohmic behavior.
In high external potassium the current did reverse at the expected potassium equilibrium potential but it did not follow the expected ohmic relations.
The correct way to split T3 cables is to use what's called a power splitter, which contains a transformer to balance the impedance properly at 75 ohms on all connections.
The exposed backside is recessed at the central gate location to define the current path which connects the source and drain ohmic contacts.
Bilayers of Ni / Au and Al / Ti were deposited by e-beam evaporation as p- and n-type ohmic contacts for current injection.
It is important for the termination to be precisely 50 ohms for the bridge to function properly on 50-ohm communication systems.
If you use a resistor less than 100 ohms you'll know it because it will get hot.